Controle de Potências para Geração Eólica com GIGE e Compensação de Correntes Harmônicas da Rede Elétrica

Ângelo Marcílio M. dos Santos; Adson Bezerra Moreira; Ricardo Parcelle Cardoso Pacífico; Nathanael Soares Costa

doi:10.20906/CBA2022/3564

Ângelo Marcílio M. dos Santos Programa de Pós Graduação em Engenharia Elétrica e de Computação (PPGEEC), Campus Sobral, Universidade Federal do Ceará, CE
Adson Bezerra Moreira Programa de Pós Graduação em Engenharia Elétrica e de Computação (PPGEEC), Campus Sobral, Universidade Federal do Ceará, CE
Ricardo Parcelle Cardoso Pacífico Programa de Pós Graduação em Engenharia Elétrica e de Computação (PPGEEC), Campus Sobral, Universidade Federal do Ceará, CE
Nathanael Soares Costa Programa de Pós Graduação em Engenharia Elétrica e de Computação (PPGEEC), Campus Sobral, Universidade Federal do Ceará, CE

DOI: https://doi.org/10.20906/CBA2022/3564

Keywords: Wind power generation, SCIG, Back-to-back, Power quality, APF

Abstract

This paper presents a wind power generation system driven by a Squirrel Cage Induction Generator (SCIG), connected to the grid and which mitigates harmonics of the grid currents by means of an Active Power Filter (APF) that uses the instantaneous power (p-q) strategy. The system consists of wind turbine, gearbox, GIGE, electronic back-to-back power converter and non-linear loads. The control of the GIGE and the power delivered to the grid is carried out, in addition to performing MPPT through the method of optimal peak speed. The studied system was mathematically modeled and simulated using Matlab / Simulink software. Simulation results confirm the effectiveness of the proposed research.